Fully Insured
Public liability cover in place, with documentation supplied on request.
Wall and brick cleaning for masonry elevations
Brickwork, stone elevations and boundary walls cleaned of growth and atmospheric soiling — with the method set by the masonry and the state of the pointing, not by the equipment.
The problem
What masonry collects, and why pointing decides the method
Brick and stone walls take decades of atmospheric soiling, and the shaded, north-facing and rain-splashed sections carry algae on top of it. Growth holds moisture against the wall, and a green boundary wall makes an otherwise well-kept property look tired.
The complication is always the mortar. Pointing that has already perished washes out during cleaning, and a wall that has been repointed badly, or built in soft lime mortar, will not tolerate the pressure sound modern brickwork shrugs off.
So the wall is assessed before anything is switched on: brick type, pointing condition, previous repairs and coatings. Sound modern facing brick can take controlled pressure; historic, soft or spalled masonry is soft washed, because pressure takes the fired face off the brick and opens the joints.
This is masonry cleaning. Rendered elevations are covered by our render cleaning page, and painted or clad walls by soft washing.
What the service involves
Wall and brick cleaning removes algae, atmospheric soiling and general weathering from masonry elevations, boundary walls and brick detailing, using the gentlest method that will do the job.
Sound modern brickwork can often take controlled pressure. Historic, soft or previously repointed brick is cleaned by soft washing, because pressure erodes the fired face and opens up joints.
Our method
How we approach wall & brick cleaning
- 01
Assessment
We check the brick type, the state of the pointing and any previous repairs or coatings, then agree the method.
- 02
Protection
Windows, doors, vents, planting and paving below the wall are protected.
- 03
Pre-treatment where needed
Organic growth is treated and given dwell time so less mechanical force is needed.
- 04
Controlled cleaning
Cleaning is carried out at low pressure or by soft wash, with a test area first where the masonry is old or unusual.
- 05
Rinse and clean-up
The elevation and the ground below are rinsed and cleared.
- 06
Inspection and aftercare
We review the wall with you and report open joints, spalling or damp-related staining.
Real result
Before and after
What's included
Every wall & brick cleaning visit
- Soft wash first, pressure only where safe
- Mortar joints protected
- Algae, moss and lichen removal
- Efflorescence and staining treatment
- Restores the colour and detail of the brickwork
- Removes growth that holds moisture against the wall
- Reveals failed pointing before water penetrates further
- Improves boundary walls, garden walls and elevations alike
What affects your quotation
Why we price each property individually
- The masonry type — modern facing brick, historic or soft brick, natural or reconstituted stone
- The condition of the pointing and any previous repointing, repairs or masonry paint
- Elevation area and height, and whether every run can be reached safely from ground level
- How much organic growth and ingrained atmospheric soiling has built up
- Whether adjoining render, paving or roofline cleaning is wanted at the same visit
Every quotation is prepared for the property in front of us. Tell us the surface, rough size and access and we will confirm the method and the price.
Surface care
Masonry-care considerations
- Historic, soft and previously repointed brick is soft washed only; lime mortar and older pointing need chemistry to do the work rather than pressure.
- Mortar that has already failed will wash out during cleaning and needs repointing afterwards — cleaning reveals it rather than causes it.
- Spalled and frost-damaged brick faces can lose further material, so those areas are identified and treated cautiously.
- Efflorescence can bloom as salts move to the surface while the wall dries out; that is the masonry, not the clean.
- Tide marks and staining caused by damp will return unless the underlying cause is dealt with, and aged masonry paint can lift where adhesion has already failed.
How we reduce the risk
- A walk-round inspection before anything is switched on, so existing defects are noted and shown to you
- Method, pressure and nozzle selected for the substrate rather than a single setting used everywhere
- A small test area in a discreet spot where the surface is unusual, delicate or of unknown age
- Adjacent surfaces, planting, air bricks, vents and paintwork protected or avoided as appropriate
- Anything we find part-way through — a loose slab, a failed joint, a cracked tile — raised with you before we continue
Being straight with you
What cleaning cannot put right
- Perished mortar joints, which need repointing
- Spalled or frost-damaged brick faces
- Structural cracking or movement
- Damp problems and their causes
Keeping the result
- Have failed pointing repaired before winter to limit frost damage
- Keep climbing planting and soil levels away from the wall face
- Clear leaf litter and standing debris through autumn — organic matter is what feeds regrowth
- Book a lighter maintenance visit before growth re-establishes rather than waiting for it to look bad again
Where a surface would genuinely benefit from protection once it is clean and dry, ask about exterior surface sealing.
Why us
Why Refresh Revive?
White Glove Standard™
The same documented standard of workmanship and finish on every single visit.
Surface-Specific Cleaning Methods
Soft washing, pure water or controlled pressure — matched to the material, never guessed.
Before & After Photography
Every job recorded so you can see exactly what changed, including work at height.
Professional Equipment & Safe Chemistry
Commercial-grade equipment and correctly dosed products, applied by trained operatives.
Honest Advice with No Pressure Selling
If a treatment isn't right for your property, we tell you — and explain why.
Where we work
Wall & brick cleaning from our Bolton, Greater Manchester base
We cover Lancashire, Cheshire & the North West for homes and commercial premises of every type. Check the towns we cover or ask if you are just outside them.
Related work
Often booked at the same visit
Driveway cleaning
Block paving, Indian sandstone, porcelain, concrete and tarmac restored with rotary surface cleaning and hand-lanced detail.
Read more →Patio cleaning
Patios brought back to their original colour, with jointing and planting protected throughout the clean.
Read more →Roof cleaning & moss removal
Moss removed from tiles and slate by hand, then soft washed with a biocide. No high pressure is used on your roof covering.
Read more →Render cleaning
Soft washing for K-Rend, silicone render, painted render and pebbledash — the method is chosen after we assess the finish, so the coating is not worked mechanically.
Read more →Soft washing
Low-pressure biocide cleaning for rendered and painted elevations — algae, lichen and black streaking treated at the root. For render and walls, not roofs; roof moss removal is a separate service.
Read more →Gutter clearing
Gutters and downpipes cleared by high-reach vacuum, with camera evidence of every run before and after.
Read more →Gutter, fascia & soffit cleaning
UPVC gutter faces, fascias and soffits washed down using pure water and soft brush heads.
Read more →Pure Water Window Cleaning
Professional exterior window cleaning using a purified-water reach-and-wash system for a clear, streak-free finish across glass, frames and sills. Safe high-reach cleaning from ground level, with no harsh detergents and no ladders resting against the property.
Read more →Stone & paving cleaning
Natural stone, flagging, York stone, limestone and porcelain cleaned with the care each material needs.
Read more →Conservatory cleaning
Conservatory roofs, frames, finials and box gutters cleaned so the light comes back into the room.
Read more →Decking cleaning
Timber and composite decking cleaned at the right pressure to lift algae without furring the grain.
Read more →Pressure washing
Controlled high-pressure cleaning for hard surfaces that can take it — paths, steps, yards, forecourts and walls.
Read more →Swimming Pool Surround Cleaning
Pool surrounds, coping and surrounding paving cleaned and de-slimed. This service covers the surround only — not pool water, liners, filtration or internal pool systems.
Read more →Next step
Get a free quote for wall & brick cleaning
Send us the surface, rough size and access details — photographs help. We normally respond within one working day with the method we would use and the price. Where a job needs a closer look, we say so rather than guess.